my-PV Power Meter: Excess captured quickly and precisely
my-PV Power Meter maximizes the self-consumption of your PV system in the simplest way. It detects the energy flows of the PV system and transmits the excess energy data to the PV Power Manager AC•THOR, AC•THOR 9s or AC ELWA-E.
As a result, only the energy that is currently available is used to generate heat. Power feed-in is avoided. There is therefore no feed-in into the electricity grid: PV self-consumption is maximized and the public grid is relieved.
3-phase power meter for AC•THOR and AC•THOR 9s
my-PV Power Meter has an Ethernet interface and can therefore easily be integrated into an existing network infrastructure. At the "other end" of the network is AC•THOR or AC•THOR 9s, which communicates with Power Meter. Both together now fulfil the desired control function.
my-PV Power Meter can also be connected directly to AC•THOR or AC•THOR 9s, a cross-over network cable is sufficient. This does not require a router or network switch.
Third possibility: the connection via standard powerline adapters saves the direct wiring between the two devices.
And also for AC ELWA-E
Just as with AC•THOR or AC•THOR 9s, my-PV Power Meter can also be used with the proven AC ELWA-E. More simply, surplus management is barely imaginable.
Also in this case, connection options via router / switch, directly or via Powerline are possible.
And at the same time, this solution is very inexpensive.
Bi-directional measurement is easy to install
my-PV Power Meter is mounted in the distribution cabinet directly after the utility meter and detects the power flow via three external clamp-on current transducers which can be mounted without disconnecting the phases. It is hardly easier.
|
my-PV Power Meter can also be integrated into freely programmable Smart Home controllers as a bidirectional counter with Modbus TCP interface. |
Advantages of my-PV Power Meter
-
Clamp-on current transducers for the simplest data acquisition and high installation comfort
-
Also for feed-in points with big power rates in commercial applications geeignet
-
Communication with AC•THOR, AC•THOR 9s or AC ELWA-E via network or via direct connection
Technical data
| Measurement range | 0 - 60 A; 230 V AC (+- 10%) |
| Interface | Ethernet |
| Dimension (W x H x D) | 70 x 90 x 58 mm |
| Protection class | IP 20 |
| Clamp-on current transducers: Max. wire diamete | max. 10 +/- 0,3 mm |
| Special sizes (W× H × L) | 0-100 A Max. wire diameter 23 mm, 51 x 41 x 65 mm |
| 0-200 A Max. wire diameter 23 mm, 51 x 41 x 65 mm | |
| 0-400 A Max. wire diameter 36 mm, 67 x 50 x 87 mm | |
| 0-600 A Max. wire diameter 36 mm, 67 x 50 x 87 mm |
To ensure that everythink runs smoothly with my-PV Power Meter
Find out more ...
- Default
- Title
- Date
- Random
