Reference project Denmark
ELWA in double pack in Denmark
2 ELWAs completely replace the gas heating system for 8 months – for hot water and for heating.
Facts about the project
- Client/owner/planner:
- Location:
- Construction type:
- Construction year:
- PV-power and orientation:
- Heat storage size:
- my-PV product in use:
- System control by/with:
)
How did you come to my-PV?
I found the Austrian manufacturer of photovoltaic heating solutions via Google. A lot of DIY applications can be found on the internet, which often have the flaw that the systems do not work together or can only be used together partially or even interfere with each other. This is not the case with the my-PV system, as it continuously adjusts the variable power and regulates it accordingly. This is not an on/off logic, but much higher than that – and this system has convinced me.
Obstacles/specialities during the installation
Installation is really simple. The piping of the new tank was a big task compared to the commissioning of the ELWA.
Brief explanation of the system – what should be mentioned?
Until now, the heating was provided by natural gas. Since the installation of the photovoltaic system together with the two ELWAs from my-PV, the natural gas has been turned off, because the PV power is sufficient to cover the demand from March to September.
The homeowner has installed an intelligent valve system that enables efficient use of hot water. In summer, the gas is turned off completely and there is no water supply through the gas stove for hot water heating - this is possible solely with ELWA, even in Denmark! The target temperature on ELWA is set at 60 °C, and the hot water is used primarily for sanitary purposes, in the kitchen and then for space heating, as the owner has water-based space heating. If the temperature of the hot water (space heating) is above 35 °C, it mixes with cold water and is then used for space heating to keep the system safe.
Persons in the household – hot water demand etc.?
5 people live in the 230 m² single-family house, 3 of them are adults. On average, 12 kW per day are used for hot water.
Is hot water backup with mains power used?
In this case, no hot water backup via mains electricity is activated, as only electricity from the sun is sufficient.
Any cost changes/ROI?
The system runs from March to October. The investment required for this is roughly equivalent to the gas bill for one year. The expected gas price for 2022 is €4,500, normally €1,600 has been paid so far, but in 2022 the price will more than double. It is estimated that there will be an amortization of the investment in 4-5 years. The EU is also pushing to reduce gas consumption in Denmark by 2030.
Personal customer opinion and resumee
ELWA from my-PV is easy to operate, you don’t have to think about anything. It is very effective, even on cloudy days, every day, the desired temperature of the hot water was reached.
)
)
)
)
Our reference projects
)
3 photovoltaic modules for hot water
Even a small PV system with 1.4 kWp prepares hot water in the summer with ELWA and thus saves 1 cubic meter of gas every day.
Read more...)
Swiss family increases self-consumption
In single-family house in the canton of Aargau, the Swiss software manufacturer Solar Manager controls the AC•THOR 9s!
Read more...)
Hot water with the sun in Germany
The sun sends no bill: Thanks to ELWA, the sun provides hot water at no cost, even in the German Harz region.
Read more...)
Optimizing off-grid PV systems with the AC•THOR
A British customer enhances his energy independence by optimizing his off-grid PV system with the AC•THOR.
Read more...)
Photovoltaic heat during the gas crisis
In a semi-detached house in Münsterland, the AC•THOR from my-PV supports a condensing boiler with the power of the sun.
Read more...)
AC•THOR: Electricity meets relaxation
A Belgian homeowner heats up his outdoor-jacuzzi in an environmentally friendly way with the AC•THOR.
Read more...