)
CT clamps new in our product range
Self-consumption systems are becoming bigger and bigger. For this reason, we have extended our product range to include special sizes of CT clamps for my-PV Power Meter.
What exactly does a CT clamp do?
A CT clamp measures the current flowing through the wire. It is installed around the phase at the grid feed-in point. my-PV Power Meter contains as standard three 60A transformers, which are sometimes too small due to the ever-increasing power of self-consumption systems.
New in our product range:
- CT Clamp 100 A for my-PV Power Meter / 3 pieces in a set for the 3 phases in the house
- CT Clamp 200 A for my-PV Power Meter / 3 pieces in a set for the 3 phases in the house
Instructions for correct commissioning can be found here:
CT clamps settings
my-PV Power Meter Operation Manual
More articles
){kind=logo}
Socios
Nuevo socio de compatibilidad: Solis¡Los inversores de Solis ahora también son compatibles con las soluciones solar-eléctricas de my-PV!
Mehr lesen...)
Referencia
Antigua granja irlandesa transformada en un hogar alimentado por energía solarIndependencia con el SOL•THOR: producción autónoma de agua caliente en una antigua granja irlandesa.
Mehr lesen...)
General
¡Utiliza tú mismo la energía de tu central solar de balcón en lugar de regalarla!Cuatro variantes muestran que, en una central solar de balcón de 2 kWp, la calefacción se convierte en la clave para aprovech
Mehr lesen...