)
CT clamps new in our product range
Self-consumption systems are becoming bigger and bigger. For this reason, we have extended our product range to include special sizes of CT clamps for my-PV Power Meter.
What exactly does a CT clamp do?
A CT clamp measures the current flowing through the wire. It is installed around the phase at the grid feed-in point. my-PV Power Meter contains as standard three 60A transformers, which are sometimes too small due to the ever-increasing power of self-consumption systems.
New in our product range:
- CT Clamp 100 A for my-PV Power Meter / 3 pieces in a set for the 3 phases in the house
- CT Clamp 200 A for my-PV Power Meter / 3 pieces in a set for the 3 phases in the house
Instructions for correct commissioning can be found here:
CT clamps settings
my-PV Power Meter Operation Manual
More articles
){kind=logo}
Partner
Using dynamic electricity tariffs for heat – with SpottyDiscover how to optimize heat generation with dynamic electricity tariffs with my-PV and Spotty – with or without PV.
Leggi di più...)
Referenze
Transizione energetica nella cantina: fotovoltaico invece del gas in Alto AdigeLa cantina usa l’eccesso di energia fotovoltaica: my-PV assicura acqua calda efficiente in Alto Adige.
Leggi di più...)
Referenze
Progetto scolastico porta il riscaldamento solare in una casa a schieraAcqua calda da una soluzione fotovoltaica off-grid invece di un impianto a gasolio – un'alternativa conveniente.
Leggi di più...