)
|General
Support AC•THOR / AC•THOR s Firmware a Changes
Support: AC•THOR / AC•THOR 9s Firmware a0020410 changes
- All signal sources, including those that were previously only selectable via the web interface, can now be set on the display.
- The frequency mode is no longer a separate operating mode. Instead, frequency control can be selected as a signal source. Thus, the operating modes M1 to M7 can now be used in AC off-grid systems.
- A firmware update on a unit in "M8 frequency mode" automatically switches it to "M1 hot water" operating mode and "frequency" is set as the signal source.
- New signal source "Fronius Gen24 Manual" added.
- Correction for operating mode M7. The PWM output signal works correctly again.
- The heat pump operating mode M4 can now also be used if no meter value is known at the feed-in point. The power specifications, e.g. via Modbus TCP, are sufficient information for the control.
- The combination with charging columns from KEBA and Eaton is now also possible if no meter value is known at the feed-in point. The power specifications, e.g. via Modbus TCP, are sufficient as information for the control.
- Further information here:Keba/Eaton(German)
- Optimising the data connection with my-PV.LIVE
- Here you will find the latestoperating instructions
More articles
)
General
Utilice tarifas eléctricas dinámicas para calefacción con el my-PV DTO y HEA•THOR¡Utilizar electricidad barata del mercado para calefacción ya es una realidad, no solo la electricidad renovable de un sistem
Leer más...)
General
¡my-PV en ISH 2025: ¡Experimenta el futuro del calor fotovoltaico!Del 17 al 21 de marzo, se celebrará en Frankfurt la feria líder mundial de agua, calefacción y aire acondicionado.
Leer más...)
Referencia
Premio de protección del clima para una casa multifamiliar patrimonial: Energía solar fotovoltaica en un edificio históricoUna casa de 150 años, diseñada para ser casi autosuficiente en energía, ganó un Premio de Protección del Clima.
Leer más...