)
AC•THOR / AC•THOR 9s shows "Heating Finished" but the target temperature has not been reached yet?
Our "Support" section provides valuable insights, which provide you with practical tips on the operation of our devices.
In this FAQ we address the question of why your device displays 'Heating finished,' and the green checkmark on the home screen is lit permanently, even though the target temperature has not been reached yet?
NOTE
NOTE: From firmware version a0020806, this symbol has been slightly adjusted for better differentiation from the 'Standby' status. The 'Heating finished' status is now represented like the icon below:
This applies to both the AC•THOR display and the web interface.
We recommend to check the 'Load' status on the Info page on the display or the web interface!
)
Detailed information about the load on the AC•THOR:
)
Detailed information about the load on the AC•THOR 9s:
)
If the load status is '0' or 'none' (for AC•THOR) or '1:0 2:0 3:0' (for AC•THOR 9s), it may have the following causes:
The shutdown temperature of the thermostat has already been reached.
Please consider the current temperature in the storage! If the shutdown temperature on a heating element with a bimetal thermostat is set too low, the AC•THOR cannot reach the target temperature!The connection to the heating load is otherwise interrupted.
Perhaps the safety temperature limiter (STB) has been triggered. For my-PV immersion heaters, the STB may have been triggered by vibrations during transport! In this case, it must be manually reset.
A three-phase heating load has been connected to the AC•THOR 9s without a neutral conductor. The device requires a star point (neutral) at the consumer!
Bon à savoir
You can also perform a simple functional check of the AC•THOR with another purely ohmic load or resistive heat generator. Even a simple kettle is suitable for this purpose!
Issue not resolved? Please fill out the support form.
Acheter des produits my-PV
chez nos fournisseurs de confiance
Les produits my-PV vous aident à utiliser votre énergie photovoltaïque autoproduite pour vos propres besoins sans aucun détour. Vous pouvez trouver la bonne source d'approvisionnement ici :
Vers les fournisseursEau chaude avec photovoltaïque
Tirez le meilleur parti de votre système PV !
Utilisez simplement votre électricité photovoltaïque vous-même au lieu de l'injecter dans le réseau électrique public. Notre principe vous permet d'utiliser au mieux votre énergie solaire autoproduite dans votre propre foyer.
Plus d'informationMore articles
){kind=logo}
Partenaires
Using dynamic electricity tariffs for heat – with SpottyDiscover how to optimize heat generation with dynamic electricity tariffs with my-PV and Spotty – with or without PV.
lire la suite...)
Références
Transition énergétique au domaine viticole : photovoltaïque au lieu du gaz en Tyrol du SudLe domaine viticole utilise le surplus photovoltaïque : my-PV assure une production d’eau chaude efficace en Tyrol du Sud.
lire la suite...)
Références
Un projet scolaire apporte de la chaleur solaire à une maison de villeEau chaude grâce à une solution photovoltaïque autonome au lieu d’un chauffage au fioul – une alternative économique.
lire la suite...