ETHERMA und myPV News
|Généralités

Support AC•THOR / AC•THOR s Firmware a Changes

Support: AC•THOR / AC•THOR 9s Firmware a0020410 changes

  • All signal sources, including those that were previously only selectable via the web interface, can now be set on the display.
  • The frequency mode is no longer a separate operating mode. Instead, frequency control can be selected as a signal source. Thus, the operating modes M1 to M7 can now be used in AC off-grid systems.
  • A firmware update on a unit in "M8 frequency mode" automatically switches it to "M1 hot water" operating mode and "frequency" is set as the signal source.
  • New signal source "Fronius Gen24 Manual" added.
  • Correction for operating mode M7. The PWM output signal works correctly again.
  • The heat pump operating mode M4 can now also be used if no meter value is known at the feed-in point. The power specifications, e.g. via Modbus TCP, are sufficient information for the control.
  • The combination with charging columns from KEBA and Eaton is now also possible if no meter value is known at the feed-in point. The power specifications, e.g. via Modbus TCP, are sufficient as information for the control.
  • Further information here:Keba/Eaton(German)
  • Optimising the data connection with my-PV.LIVE
  • Here you will find the latestoperating instructions

More articles

Partenaires

Over 70 Compatible Partners for my-PV Products

In line with the principle of system openness and to the benefit of customers, my-PV devices enable integration into systems

lire la suite...

Généralités

Off-Grid Photovoltaics: How Independent Power Supply Works

How does an independent power supply work with the use of off-grid systems?

lire la suite...

Généralités

Le my-PV WiFi Meter ne peut pas être connecté en tant qu'unité de contrôle

Notre section "Support" offre des informations précieuses qui vous fournissent une assistance le fonctionne de nos appareils.

lire la suite...